Flushart Plastic Laminate
FLUSHART: PLASTIC LAMINATE Plastic laminate bathroom partition units are made of fine quality plastic surface material that is applied with adhesive.
A wide range of designer colors is available to coordinate with modern or traditional interiors.
A wide range of designer colors is available to coordinate with modern or traditional interiors.
- Finest quality lamination
- Wide range of colors available
- Suited to many interior situations where color is important
DOOR & PANELS: Door & panels shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core with the highest quality adhesive assuring a rigid, permanent bond. Door and panels finish - 1" thickness.
PILASTERS: The anchoring device shall consist of a leveling device fastened to bottom of pilaster and attached to the floor. Pilasters shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core. Pilaster shall be 1-1/4" thick.
HARDWARE: All hardware shall be heavy nonferrous chrome plated castings. Fastenings by means of thru-bolts with theft proof heads. Pilaster shoe shall be 4" high, of #302, 18-8 polished stainless steel. Includes all necessary hardware and fittings for a complete installation. Brass and stainless steel hardware available at additional cost.
SURFACING: All faces and edges shall be 1/16" general purpose laminated plastic. All in accordance with NEMA standards.
FINISH: Laminated plastic shall be as selected from Flush Metal's standard plastic colors and patterns.
COLOR: As selected from color guide.
PILASTERS: The anchoring device shall consist of a leveling device fastened to bottom of pilaster and attached to the floor. Pilasters shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core. Pilaster shall be 1-1/4" thick.
HARDWARE: All hardware shall be heavy nonferrous chrome plated castings. Fastenings by means of thru-bolts with theft proof heads. Pilaster shoe shall be 4" high, of #302, 18-8 polished stainless steel. Includes all necessary hardware and fittings for a complete installation. Brass and stainless steel hardware available at additional cost.
SURFACING: All faces and edges shall be 1/16" general purpose laminated plastic. All in accordance with NEMA standards.
FINISH: Laminated plastic shall be as selected from Flush Metal's standard plastic colors and patterns.
COLOR: As selected from color guide.
